Nurbs continuity
Applications in architecture, product and digital fabrication
DOI:
https://doi.org/10.37467/revtechno.v13.4811Keywords:
NURBS, Computer Aided Design, Construction technology, Algorithm thinking, Architectural geometry, Digital fabrication, ParameterizationAbstract
The increasing complexity in contemporary architectural design has given rise to free-form surfaces that cannot be solved by traditional design and construction methods. The study of the continuity of NURBS surfaces and curves becomes especially relevant, either to segment a complex surface in fragments that allow its rationalization, or for the design through the aggregation of several surfaces looking for the uniformity of the whole. Different methods of establishing continuity between NURBS are analyzed, taking into account the different parameters that define the NURBS and their influence on the level of smoothness and deviation obtained.
References
Aparicio Pérez, D., & del Blanco García, F. L. (2022). Diseño de experiencias inmersivas para una ciudad utópica. Reconstrucción gráfica y virtual de “The Walking City”. EGA Revista de Expresión Gráfica Arquitectónica, 27(44), 98–109. https://doi.org/10.4995/ega.2022.14305
Álvarez Ayuso, L., & del Blanco García, F. (2021). Aplicación de redes neuronales al diseño de vivienda colectiva. Procesos generativos de combinatoria y automatización mediante inteligencia artificial. Rita_revista Indexada de Textos Académicos, 16, 214–231. DOI: https://doi.org/10.24192/2386-7027(2021)(v16)(20)
Barsky, B. A. and DeRose, T. D. (1989). Geometric continuity of parametric curves: three equivalent characterizations, IEEE Computer Graphics and Applications, 9(6), pp. 60–69. doi: 10.1109/38.41470.
Bartolomei, C. et al. (2020). From anamorphosis to vision: “3D Sidewalk Chalk Art”. Disegnarecon, 13(24), 1–14. DOI: https://doi.org/10.20365/disegnarecon.24.2020.1
Bedi S, Ali I, Quan N (1993). Advanced interpolation techniques for NC machines. Trans ASME J Eng Ind 115:329–336
Block, P., Kilian, A. and Pottmann, H. (2015). ‘Steering of form - New integrative approaches to architectural design and modeling’, CAD Computer Aided Design. doi: 10.1016/j.cad.2014.04.007.
de Boor, C. R. (1980). A Practical Guide to Splines. Mathematics of Computation, 34(149), p. 325. doi: 10.2307/2006241.
de Molina, L. & Valero, E. (2021). Habitar en la era digital. Modelos colaborativos y su respuesta en tiempos de crisis. Rita Revista Indexada de Textos Académicos, 5, pp 94-101. DOI: 10.24192/2386-7027(2020)(v14)(04)
del Blanco García, F. L. and García Ríos, I. (2017). Las cúpulas de Félix Candela. Análisis y reconstitución de las instalaciones deportivas de la Universidad Brown, 1965-1972, EGA Expresión Gráfica Arquitectónica, 22(29), pp. 228–239. https://doi.org/10.4995/ega.2017.7358
del Blanco García, F. L. and García Ríos, I. (2018). Fernando Higueras y Félix Candela en un retorno a la geometría de paraguas invertidos. Análisis y reconstitución gráfica del aeropuerto de Murcia, 1983, EGA Expresión Gráfica Arquitectónica, 23(32), pp. 232–243. https://doi.org/10.4995/ega.2018.9813
del Blanco García, F. L. (2021). Virtual reconstruction and geometric analysis of Félix Candela’s inverted umbrellas for The Villahermosa Cathedral. Disegnarecon, 14(27), 1–14. https://doi.org/10.20365/disegnarecon.27.2021.10
del Blanco García, F. L. & García Ríos, I. (2022). Félix Candela and Fernando Higueras. Eight years and seven projects in common.” VLC arquitectura 9, no. 1: 161-188. https://doi.org/10.4995/vlc.2022.15288
del Blanco García, F. L. (2022). Reconstructing Pérez Piñero’ s Anoeta Velodrome. Nexus Network Journal. https://doi.org/10.1007/s00004-022-00590-3
Canestrino, G (2021). Considerations on Optimization as an Architectural Design Tool. Nexus Network Journal 23, 919–931. https://doi.org/10.1007/s00004-021-00563-y
DeRose, T. D. and Barsky, B. A. (1988) ‘Geometric Continuity, Shape Parameters, and Geometric Constructions for Catmull-Rom Splines’, ACM Transactions on Graphics (TOG), 7(1), pp. 1–41. doi: 10.1145/42188.42265.
De Vicente Domínguez, A. M., & Sierra Sánchez, J. (2021). Technicalities in scientific communication: Analysis of the dissemination strategies used by the SINC Agency in the information published on its Twitter profile. TECHNO REVIEW. International Technology, Science and Society Review, 10(2), 147–158. https://doi.org/10.37467/gka-revtechno.v10.3011
Ding GL (2008). Research on modeling and interpolation of the tool-path based on cylindrical helix spline. Dissertation, Huazhong University of Science and Technology.
Du DS, Liu YD, Yan CL, Li CX (2006) An accurate adaptive parameter curve interpolator for NURBS curve interpolation. Int J Adv Manuf Technol DOI: 10.1007/S00170-006-0412-y
Fallica, S., Garozzo, R., & Santagati, C. (2021). Retraced memories - virtual reconstruction of an architectural landmark. Virtual Archaeology Review, 12(25), 124–139. https://doi.org/10.4995/var.2021.15302
Felicetti, A., Paolanti, M., Zingaretti, P., Pierdicca, R., & Malinverni, E. S. (2021). Mo.Se.: Mosaic image segmentation based on deep cascading learning. Virtual Archaeology Review, 12(24), 25–38. https://doi.org/10.4995/var.2021.14179
Flöry, S., & Pottmann, H. (2010). Ruled surfaces for rationalization and design in architecture. Life In:Formation: On Responsive Information and Variations in Architecture - Proceedings of the 30th Annual Conference of the Association for Computer Aided Design in Architecture, ACADIA 2010, 103–109.
García Pino, F. (2020). Ron Resch. Patrones de doblado. El diseño topológico desde la geometría computarizada. Ron Resch. Bending Patterns. The Topological design from computerizes geometry. Rita Revista Indexada de Textos Academicos, 13, 148–156. DOI 10.24192/2386-7027(2020)(v13)(10)
García, F. L., & Ríos, I. (2016). De las estructuras laminares a las estructuras metálicas en la arquitectura de Félix Candela. Análisis y reconstitución de la sala de exposiciones para el concurso del Palacio Olímpico de los Deportes, México 1968. Rita Revista Indexada de Textos Academicos, 5, 98–105. DOI: https://doi.org/10.24192/2386-7027(2016)(v5)(05)
Hartmann, E. (2003) ‘Geometry and Algortihms for Computer Aided Design’, Journal of computational physics, 212(October), pp. 393–399.
Ingleby, T., Orlando, S (2021). Translating Movement into Architectural Form. Nexus Network Journal 23, 1017–1037. https://doi.org/10.1007/s00004-021-00567-8
Kilian, M., Pellis, D., Wallner, J., & Pottmann, H. (2017). Material-minimizing forms and structures. ACM Transactions on Graphics, 36(6). https://doi.org/10.1145/3130800.3130827
Lee, E. T. Y. (1986) ‘Comments on some B-spline algorithms’, Computing, 36(3), pp. 229–238. doi: 10.1007/BF02240069.
Liua X, Ahmada F, Yamazakia K, Morib M (2005). Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics. Int J Mach Tools Manuf 45:433–444
Li W, Liu YD, Yamazaki K, Fujisima M, Mori M (2008). The design of a NURBS pre-interpolator for five-axis machining. Int J Adv Manuf Technol. doi:10.1007/s00170-006-0905-8
Lluis i Ginovart, J., Lluis-Teruel, C., & Ugalde-Blázquez, I. (2021). Bóvedas tabicadas en la ingeniería militar española (s. XVIII). Informes De La Construcción, 73(562), e393. https://doi.org/10.3989/ic.80000
Morales Guzman, C. (2021). Desarrollo de un sistema de aspas transformable en las cubiertas plegables. Informes De La Construcción, 73(562), e397. https://doi.org/10.3989/ic.73030
Moreno Latorre, Arturo; del Blanco García, F. L. (2021). Graphic communication in Architecture Competitions. Data visualization as an analysis tool in EGA. EGA Expresión Gráfica Arquitectónica, 26(41), 190–205. https://doi.org/10.4995/ega.2021.14054
Parrinello, S. (2020). The virtual reconstruction of the historic districts of Shanghai European identity in traditional Chinese architecture. Disegnarecon, 13(25), 1–13. https://doi.org/10.20365/disegnarecon.25.2020.18
Piegl L, Tiller W (2003) The NURBS book, 2nd edn. Springer, Berlin
Pottmann, H. (2010). Architectural geometry as design knowledge. Architectural Design, 80(4). https://doi.org/10.1002/ad.1109
Quaresma, A. (2021). Weak artificial intelligence and computational brute strength. TECHNO REVIEW. International Technology, Science and Society Review, 10(1), pp. 67–78. https://doi.org/10.37467/gka-revtechno.v10.2815
Salazar Lozano, María del Pilar, and Antonio José Cidoncha Pérez (2021). Living in a metal shed. Quonset Huts on Naval Station Rota. VLC arquitectura 8, no. 2: 91-116. https://doi.org/10.4995/vlc.2021.13423
Sun YW, Jia ZY, Ren F, Guo DM (2008) Adaptive feedrate scheduling for NC machining along curvilinear paths with improved kinematic and geometric properties. Int J Adv Manuf Technol. doi:10.1007/s00170-006-0817-7
Tang, C. et al. (2016) ‘Interactive design of developable surfaces’, ACM Transactions on Graphics, 35(2). doi: 10.1145/2832906.
Yazar, T. (2021). Compass Construction of Bézier Curves and B-Splines. Nexus Network Joural 23, 789–811. https://doi.org/10.1007/s00004-020-00542-9
Wolff, Cecilia, and Mauricio Cárcamo (2021). Enactive or symbolic representation? When the order alters the product. VLC arquitectura 8, no. 1: 173-188. https://doi.org/10.4995/vlc.2021.12534
Downloads
Published
Issue
Section
License
All articles are published under an Attribution-NoDerivatives 4.0 International (CC BY-ND 4.0) license. Authors retain copyright over their work.
