TY - JOUR AU - EMRE, Fatma Bilge PY - 2022/09/29 Y2 - 2024/03/29 TI - Investigation of Physicochemical Properties Properties and Specific Heat Capacity of Tio2 Doped- Polydimethylsiloxane Composites JF - Nanofabrication JA - Nanofab VL - 7 IS - SE - Research articles DO - 10.37819/nanofab.007.224 UR - https://eaapublishing.org/journals/index.php/nanofab/article/view/224 SP - 1-10 AB - <p>In this study, a series TiO<sub>2</sub>-doped–polydimethylsiloxane composite (PDMS-TiO<sub>2</sub>) were synthesized at constant amount of PDMS and different amount of TiO<sub>2 </sub>particles.  For this purpose, TiO<sub>2</sub> structures were synthesized by the hydrothermal method. Morphology and chemical structure of the obtained TiO<sub>2</sub> particles were investigated by scanning electron microscope (SEM), Energy Dispersive X-ray (EDX), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy techniques. Prepared particles were directly dispersed in PDMS wax with melted. The obtained composite structures were examined structurally by SEM, FTIR, and XRD spectroscopy techniques. The intense peaks at 13° and 16.5° visible in the XRD spectrum confirm the desired composite structure. For the pure PDMS structure, 0,523 and 1,740 KeV was observed for O<sub>2</sub> and Si in the EDX spectrum. Peaks at 0.452 (K<sub>a</sub>) and 4.510 KeV (K<sub>β</sub>) were observed for the composite structures. Then, the thermal properties of the composite structures obtained were investigated by DSC analysis. The study of the specific heat capacity of obtained products is attained by using a DSC. Depending on the amount of doped TiO<sub>2</sub> particles, the specific heat capacity value increased significantly in PDMS-TiO<sub>2</sub> composite structures. Specific heat capacity study' of TiO<sub>2</sub>- polydimethylsiloxane composites is original and opened a new area about PDMS.</p> ER -